How to configure your modem

Choose modem
-
  1. Plug in the modem to the USB port

  2. Install the modem drivers and Mobile Partner Client

  3. Once installed, you can launch the application from the Mobile Partner Icon on your desktop.

  4. Go to ‘Options

    1. Click on ‘Profile Management
    2. Create a new profile by pressing ‘New
    1. Type ‘U Mobile’ in the profile name
    2. Select static on the APN and then type in the following settings:
      APN: my3g
      Access number: *99#
    3. Click on ‘Save
    1. Make sure the profile ‘U Mobile’ is selected
    2. Click on ‘Connect
  5. Once it is connected, upload and download activities can be identified from here

  1. Plug in the modem to the USB port

  2. Install the modem drivers and Join Air Client

  3. Once installed, you can launch the application from the Join Air Icon on your desktop.

  4. Click on ‘Settings’ icon

    1. Click on ‘Connection
    2. Create a new connection by pressing ‘Add’ button
    1. Select ‘Common’ tab and then type in the following settings:
      U Mobile in the "Config name" field,
      *99# in the "Dial number" field,
      Select "Use the following APN address" and type in my3g
    2. Click on ‘Save
  5. Click on the ‘X’ button to close the window

  6. Click on the connector icon to connect to the internet

  7. Success!

  1. Plug in the modem to the USB port

  2. Install the modem drivers and UMobile Connection Manager

  3. Once Installed, you can launch the application from the UMobile Connection Manager Icon on your desktop.

  4. Insert PIN

  5. Click on ‘Connect

  6. Successful Connection


Step by step installation of the modem drivers and UMobile Connection Manager

  1. Click ‘Run Autorun

  2. Start to install once UMobile Connection Manager Wizard box appeared on your screen. Click ‘Next’ .

  3. Click ‘Next

  4. Installation start

  5. Installation complete. Click ‘Finish

  6. Your terminal will start to install the device driver software

  7. Once Installed, you can launch the application from the UMobile Connection Manager Icon on your desktop.

a) Connecting via USB cable

  1. After installation of the 21Mbps modem drivers and connection manager, you are able to connect via WiFi

  2. Once Installed, you can launch the application from the UMobile Connection Manager Icon on your desktop.

  3. 3G Mobile Hotspot WebGUI Configuration Page appeared.

  4. Insert ‘PIN

  5. Check ‘Connect Internet’ under the WAN

  6. Successful Connection


b) Connecting via Wifi

  1. After installation of the 21Mbps modem drivers and connection manager, you are able to connect via WiFi

  2. Launch the client device connected to your device.

  3. Enable the WPS function of your device. Hold WPS button about 3 seconds to enable this function.

    *If the security mode of the device is OPEN or SHARE, the WPS function is useless.

  4. A) Turn on te WiFi

  5. B) WPS Password

  6. C) The password

  7. Successful Connection


Step by step installation of the modem drivers and UMobile Connection Manager

  1. Click ‘Run Autorun

  2. Start to install once UMobile Connection Manager Wizard box appeared on your screen. Click ‘Next’ .

  3. Click ‘Next

  4. Installation start

  5. Installation complete. Click ‘Finish

  6. Your terminal will start to install the device driver software

  7. Once Installed, you can launch the application from the UMobile Connection Manager Icon on your desktop.